Mining Rig Optimizer | AI-Powered Configuration Analysis

Mining Rig Optimizer

AI-driven analysis to optimize your cryptocurrency mining rig configuration for maximum efficiency, hash rate, and profitability based on your specific hardware combination.

AI-POWERED OPTIMIZATION ENGINE

Rig Configuration

PSU Load Estimate: 0% Optimal

Optimal range: 70-85% of PSU capacity

Pro Tip: Our AI selects optimal settings based on your GPU architecture and chosen algorithm for maximum efficiency.

AI is analyzing your hardware combination and calculating optimal settings…

Optimization Results

ESTIMATED HASH RATE
0 MH/s
EFFICIENCY (MH/J)
0.000
$0.00
Daily Revenue*
0W
Power Consumption
0°C
Estimated Temp
0 Days
ROI Estimate*

AI Recommendations

Getting Started
Configure your hardware settings above and click “Analyze” to receive AI-powered optimization recommendations specific to your mining rig.

Recommended Hardware Upgrades

Seasonic PRIME TX-1200

80+ Titanium PSU with 12-year warranty. Exceptional efficiency at low loads.

4.7

Noctua NF-A14 iPPC

Industrial-grade 140mm fans with 2000 RPM for maximum airflow in dense rigs.

4.9

Mining Optimization Guide

Thermal Management

Proper thermal management is crucial for GPU longevity and consistent performance. Follow these guidelines:

  • Maintain GPU core temperature below 70°C for optimal performance
  • GDDR6X memory should stay below 90°C to prevent throttling
  • Ambient temperature should be below 25°C for air-cooled systems
  • Maintain positive air pressure in mining cases to reduce dust accumulation
  • Regularly clean dust filters and GPU heatsinks every 2-3 months

Power Optimization

Undervolting and power limiting can significantly improve efficiency and reduce operating costs:

  • Most GPUs achieve optimal efficiency at 70-80% power limit
  • Reduce core voltage while maintaining memory clocks for best results
  • Use dedicated mining BIOS for additional 5-10% efficiency gains
  • Monitor wall power consumption for accurate efficiency calculations
  • Consider using server PSUs with breakout boards for multi-GPU setups

Memory Optimization

Memory overclocking provides the largest hash rate gains for most algorithms:

  • GDDR6X: +1200 to +1500 MHz offset typically stable for mining
  • GDDR6: +800 to +1000 MHz offset for most cards
  • HBM2: Focus on voltage reduction instead of frequency increases
  • Always stress test memory stability for 24+ hours before deploying
  • Monitor memory errors using tools like HWiNFO or GPU-Z
Important Notice

Revenue estimates are based on current cryptocurrency prices and network difficulty. Mining profitability fluctuates daily. Always calculate your electricity costs ($/kWh) for accurate ROI projections. The values shown are estimates – actual performance may vary based on silicon quality, ambient conditions, and specific hardware configurations. Past performance does not guarantee future results.